Eşyalarını Tamir Et Topluluk Mağaza

Model A1318 / 32 or 64 GB capacity

299 Soru Tümünü görüntüle

Seçenekler

Broken screen - touch function didn't work before or after repair

Hi,

I'm repairing an iPod 3rd Gen that came to me with a broken screen. The touch aspect didn't work.

After replacing the screen/digitizer, the touch aspect still doesn't work. I've double and triple-checked the cable and am pretty sure I have it in right.

I have also tried hard resetting, restoring, multiple times.

Any help?

Thanks in advance.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
1 Yorum

I just gave up... nothing I could find. I assume the drop damaged the logic board.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

If the touch screen doesn't work, then either the digitizer is broken, or the connection is bad, or the logic board is broken.

If you've already tried replacing the digitizer, then disconnect the cable and examine the connector on the logic board with magnification, and see if you see anything you can fix. If not, then you'll have to replace the logic board.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Yanıtını ekle

spacec0w sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 2,132