Ana içeriğe geç
Onarım Topluluğuna Katılın - Hesap Oluşturun

A touchscreen GPS released in February 2012 by Garmin with custom position of interests and junction view. The screen size is 4.3" diagonally with 480x272 resolution.

Why Won't My Touchscreen Work?

My device will turn on but when I press the screen to make any commands I can not prompt any response. Please help.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

There are three possible problems that are associated with an unresponsive touchscreen. They are listed from easiest to hardest to complete.

Dirty Screen:

  • If your device has a screen protector, remove it
  • Spray a bit of water or formulated spray onto a microfiber cloth.
  • Wipe thoroughly.
  • Using another dry microfiber cloth, immediately dry the surface.
  • Replace the screen protector with a new one if desired.

Resetting the Device Without Using the Screen:

  • With the GPS unit off, press the bottom right hand corner of the screen. Turn the unit on while maintaining pressure in the bottom right corner. When you see a prompt asking, "Do you really want to erase all user data?", you can release your finger and select yes.
  • If the bottom right of the screen is unresponsive then please refer to the broken screen guide.

Broken Screen:

  • If your device screen is still unresponsive after following the following guides above please refer to this guide for replacing a broken screen

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Nathaniel Williams sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 14

Her zaman: 677