Ana içeriğe geç

Model A1051 / 4 or 6 GB hard drive

89 Soru Tümünü görüntüle
Soru Kapandı

After replacing my Logic Board why does my Display not function?

Okay I'm looking for some help fixing my 1st Generation iPod Mini, I got it broken from a friend and when I first got it I plugged it into iTunes and got no response at all. I then brought a replacement battery from iFixit and installed that at which point the iPod did boot, I can only assume from some residual power left in the battery, and displayed the sad iPod icon and wouldn't go any further. I then took this to mean that the logic board was gone so I ordered and replaced the logic board but after I had put in the board and was connecting the display cable back to its relevant connector I noticed the connector on the new board was bigger than the old one but I simply reconnected the cable anyway and continued. Now when I connect the iPod to power I don't get any kind of screen response but I can hear the hard disk heads moving so there must be power in the board. I've begun to think that the display connector is the problem but does anyone have any insight with which they might be able to help?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

You may have ordered a logicboard for a 2nd generation mini, which has a different LCD and connector. You'll have to now find an LCD for a 2nd gen mini, or find another 1st gen mini logicboard.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,179