Eşyalarını Tamir Et Topluluk Mağaza

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Soru Tümünü görüntüle

Seçenekler

iPhone 6 front camera / earpiece no longer work after screen swap

I recently swapped my screen on an iPhone 6. After the swap I lost use of front camera / earpiece / everything on that cable. Visual inspection, everything looked alright, but I went ahead and replaced the front camera flex cable anyway. Still no luck with the new flex cable. I am now noticing the phone is getting warm and draining battery quick. Are the odds good that I screwed up another flex cable? Could there be any other issues?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

I am having a very similar issue after a 6 plus swap, but with the flex cable attached, this unit won't even boot. If I learn anything from my question, I'll share it here.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

3 Yorum:

This is what was posted to my similar question:

"Sounds like a camera issue. Faulty cameras can cause issues where it shows a black screen and text on boot, but I haven't heard of a red screen issue with the camera plugged in.

Try out the camera from the old screen, see if it works. If so, you know it is an issue with the new camera on the new screen."

tarafından

Hmmm... I've tried the old camera and a new one, both give me the same issue.

tarafından

I swapped the old flex cable, camera/mic assembly in and it boots. Mic doesn't work, which was a problem in old phone too.

tarafından

Yorum Ekle

Yanıtını ekle

ekom sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 102