Ana içeriğe geç

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Soru Tümünü görüntüle

Home button not working

Just wondering if anybody has any other troubleshooting methods to get the button working again, fingerprint sensor works fine

- Replaced home button extension cable

- Restored/updated phone

- tried recalibrating

or does anybody know a shop that can transfer the IC etc over to a new home button?

The cable hasn't been ripped and it just stopped working

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

It is possible that the small part under the button is damaged ( I forgot what it is called)

Block Image

But if you can fill the "Click" or you know the part is not Damaged follow these steps

1.Press the Sleep/Wake button to lock your device. 2.Wait a couple of seconds.

3.Press the Home button. Your device should wake up.

If your device doesn't wake up, follow these steps. Test the Home button after each step:

1.Restart your device.

2.Check for debris or dirt around the Home button and clean it with a soft cloth. 3.Remove any protective film or case that covers the Home button.

If the Home button still doesn't wake the device, or if the button is damaged, contact Apple Support.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

nope because the button clicks in

tarafından

Yorum Ekle

Yanıtını ekle

David F sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 123