Ana içeriğe geç

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2521 Soru Tümünü görüntüle

Touch Screen sometimes doesnt work

Hello Peeps,

this is my first post soooo.

Well let me explain the problem here. I bought an iPhone with screen defective i changed the screen and noticed that the touch doesnt work always. Means

I have to lock and unlock again again till it start working but then it stops and i have to do the proccess again. I bought another screen and replaced it again but the same problem stills. When the iPhone gets warm then the touch screen "okay".

Just to know I'm ready to resolder something because im a Microsolder :D

Edit: It is an Orginal Apple Screen from an Working iPhone 5

Best Regards From Germany

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

This is a common problem with bad quality copy screens

It is believed that the static from swiping the phone causes the problem and locking/unlocking resets it

Bu yanıt yardımcı oldu mu?

Puan 0

6 Yorum:

Yeah but it was a Apple Screen from an working iPhone 5 :/

tarafından

Oh, not sure then

tarafından

Check the digitizer (touch screen connector) on the board for any liquid damage.

Remove the black plastic tape cover thingy that is around the front screen connectors on the logic board to allow looking at the components near those connectors for any corrosion or liquid damage. If you do find liquid damage use 95%+ isopropyl alcohol to remove / clean them. I usually use like a clean toothbrush or some brush to brush the corrosion off / clean the board.

corrosion or liquid residue.

tarafından

I removed it but the problem stills.....

tarafından

You removed the liquid damage?

tarafından

1 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

Mark Muster sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 342