Eşyalarını Tamir Et Topluluk Mağaza

The second generation of the iPad with Wi-Fi, GSM and CDMA models. Some models were refreshed before the iPad 3. Repair is difficult and requires heat and prying. Released on March 11th, 2011. Model numbers: A1395, A1396, and A1397.

730 Soru Tümünü görüntüle

Seçenekler

Black screen post boot, but display functions properly while charging

Hello,

iPad with cracked screen was functioning normally before repair. After replacing screen/digitizer the LCD was unresponsive, but chimes indicated the OS was functioning normally. Oddly the LCD lights up the charging screen as expected when battery is allowed to die. Not a backlight issue as far as I can tell.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Hi Byrd

I hope you didn't glued your new digitizer before testing. Otherwhise I'm afraid that you will have to re-hot it to remove it.

Once the digitizer is removed, check if you positionned correctly the LCD cable to the LCD. (also check the connection of this cable to the mainboard)

It could also be the LCD cable itself.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Byrd sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 36