Eşyalarını Tamir Et Topluluk Mağaza

Early 2011 Model: A1278 / 2.3 GHz i5 or 2.7 GHz i7 processor

782 Soru Tümünü görüntüle

Seçenekler

boot fail, fan spin, black display

fixing for a friends

he say to me that is dropped and after gone on sleep, never come back and won't boot anymore.

when u press power button, stars with fan spin and black screen and no more just gradual fan acceleration

i tried:

other magsafe = same

external monitor = same

i try with no ram = no beep

no battery= same

no hd = same

im on 99% logic board issue (seems like the classical gpu failure, but strange it was dropped..)

any suggestions are appreciate

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

It's not passing the initial POST checks if it is not beeping without RAM in. Check all the power rails to ensure they are present, especially ppvcore_s0_cpu.

These are usually the worst of the bunch to solve, and is very likely to be CPU related. Good luck :)

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

2 Yorum:

thanks Reece i check the back, i found some part little oxidised, i clean and still the same... to much for me try fix this board now...but thank you!

tarafından

Where the oxidation was, check for burnt pins on components, this is likely what was causing it (but this is now logic board repair, so take it to someone who does this if you are not comfortable doing this)

tarafından

Yorum Ekle

Seçenekler

Check pp1v5 and 1v5_GPU_REG - if it is a gpu panic, than u just have to replace the cap C9560

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

lapo sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 281