Ana içeriğe geç

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1203 Soru Tümünü görüntüle

MacBook doesn't power on

Hello people.

My MB doesn't boot anymore. Whether on battery or on MagSafe, it doesn't power on.

I managed to change the DC-In board, but still doesn't power on. MagSafe is working OK because it's from an other MB.

What's the next step I should take? Is the MoBo TFU?

Thanks and kind regards,

Flavio.

Update

Hello Rick, and thanks for replying.

MagSafe lights up green, but it's not a "calm and fixed" green. It is a flickering green light.

About the battery: should I watch under the MacBook if the battery LEDs light up when I press the power-on button on the MacBook itself?

I'll eventually be trying to reset the PRAM, as a next step.

Thanks so far.

F.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
1 Yorum

Please tell us what you DO get, lights, sounds?

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

There are a few issues that might cause a MacBook to not boot up like you're experiencing, such as a damaged power button on the top case (sometimes due to spill damage), a bad logic board, or other various small issues. Does the MagSafe light illuminate when plugged into the DC-in board? Is the battery receiving power (the level indicator should light up when the button is pressed)? Have you tried resetting the PMU/SMC by holding down the power button for 10 seconds while the machine is connected to AC power? You should see the sleep light flicker and hear a tone. If that doesn't work, you might want to try resetting the PRAM. Hope this helps!

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Piramide Informatica sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,352