Ana içeriğe geç

Check out these guides for information on repairing and dissembling your sewing machine.

92 Soru Tümünü görüntüle

Skips threading in between sewing.

Hey everyone!

So heres a good question. Does anyone know why a commercial grade juki sewing machine would be skipping stitches while sewing? I work at a location where this happens a lot and we have to outsource the labor for repairs. However it would be beneficial for the company to have someone there to fix this issue. Please let me know as far as what could be the issue and maybe how to go about this maybe? I do appreciate all of you guys and thank you for your help!

-Daveyloder

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

It could be any of a number of issues:

  • thread/needle incompatibility
  • incorrect top/bottom thread tensions
  • blunt, worn or damaged hook
  • timing slightly out

* etc.

You will need to work through all possibilities, one by one, and, if still a problem then ask a Juki engineer to look at it,

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

If it is used commercially, then it will accumulate a lot of debris quickly. That can prevent the rotating thread pickup under the plate from grabbing the thread and a missed stich occurs. On the other hand, your outsourced labor needs to eat also, so why deprive them?

tarafından

Yorum Ekle

Yanıtını ekle

David Loder sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 65