Ana içeriğe geç

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2522 Soru Tümünü görüntüle

Touch only working on second try

A customer brought me an iPhone 5, the problem is that always when the screen is off for a longer time (at least 10 minutes) and I turn it on again, the touchscreen isn't working right. When I turn the screen off and on again it works fine. What could be the problem? Already tried reconnecting the flex cables. Could the display be faulty?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

You could have a bad screen assembly. The logical first step is to replace it with a good quality part.

The iPhone 6 and 6+ are well known to have problems with Touch (Touch Disease) but this is not a common problem with the 5.

iPhone 5 Screen Görseli

Ürün

iPhone 5 Screen

$34.99

Bu yanıt yardımcı oldu mu?

Puan 4

2 Yorum:

Yep you nailed it.

tarafından

I noticed an increase in temperamental behaviours with touch on a couple iPhone5 after updating to ios 10. Might be a coincidence, but...

tarafından

Yorum Ekle

there is a prossesor that starts to loose its conections due to the phone being subjected to bending.this prossesor is responsible for touch recognition.ifixit can show you wich one it is so you can replace it if it is economical to do so.There is no guarantee this is the issue but i would put money on it.good luck and always have fun fixing.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

ppalfinger sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 76