Ana içeriğe geç

2.6 GHz dual-core Intel Core i5 processor (Turbo Boost up to 3.2 GHz) with 3 MB shared L3 cache. Released February 13, 2013.

120 Soru Tümünü görüntüle

Plastic cover removal or replacement

Block Image

Does the plastic cover adhered to the battery inside the Macbook pro 13in retina early 2013 have to be replaced after being removed? I Ive tried just sticking the original back on but it doesn't stick very well. Can I just remove it?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

If you are referencing the cover the came with the new battery, it is just there to prevent the battery from sticking to things. It can be discarded after the battery is installed.

Bu yanıt yardımcı oldu mu?

Puan 3

4 Yorum:

Sorry I should have done this to begin with but I attached a picture of the flap in question to the post. Thanks in advance!

tarafından

Sorry, difference piece of plastic. Those do not stick well, I use some Kaptan tape to hold it in place.

tarafından

Does that piece of plastic have a purpose or can it be removed all together?

tarafından

Keeps the bottom plate from contacting.

tarafından

Yorum Ekle

Yanıtını ekle

Alex Higgins sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 2

Her zaman: 280