Ana içeriğe geç

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Soru Tümünü görüntüle

Brackets to secure the screen to the bezel are broken

Hello guys, how are you?

Reason I am writing today is because I bought a display for my iPhone 6, due to my screen is broken. The thing is, when I got the display, I noticed the brackets that go in the bottom (to secure the screen with the pentalobe bottom screws) were not in place (photo attached).

My question is, is there any way I can "glue" the little bracket piece to its place? Because I can take the brackets from the old display.

Thanks a lot.

-C

Block Image

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

I seriously doubt you could successfully remove the screw brackets from another screen and glue them onto a new one. Contact your supplier and ask for a replacement or refund.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yeah. You can glue them. One of the few times I would recommend super glue to be used in repairing a phone. It's easily available and should have a strong bond. You could also exchange your part, missing the brackets, but you may not want to wait for that, or if they're even willing to make an exchange

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

I'm not sure if this helps since I wasnt entirely sure what you went by bracket but i'm assuming the frame surrondung the glass/LCD assembly . I wouldnt really recommend do that as its much much better to just to return the damaged part. If this isnt ideal then yes you can replace that frame with heat and readhere it using my personal favorite. Serious Glue, as it works really really well on glass.

Block Image

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Carlos sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 414