Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

16 Eylül 2016'da satışa sunulmuştur. Model 1660, 1778 GSM ya da CDMA olarak 32, 128 ya da 256 GB kapasitelerinde ve Altın Gülü, altın, gümüş, siyah ve simsiyah renklerinde satılır.

1714 Soru Tümünü görüntüle

Ripped one of the cables on LCD, but what is it exactly?

Hi!

I have disassembled an iPhone 7 but when taking of the screen one of the two flex cables from the lcd screen got ripped. The cable that got ripped runs upwards under the LCD part, to the top. The LCD and touch still work. (fun to know that the LCD and Touch both go through one flex cable). But it disabled the home button from working. I am trying to understand how the part that I broke runs underneath the hood and what I can do to solve it. Can somebody explain it to me with pictures where the cable runs to and how it works?

Block Image

Bu soruyu yanıtlayın Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 9
Yorum Ekle

Nintendo Switch Kit'leri

Oyuna geri dönmek için hızlı bir düzeltme

Switch Kit'leri Satın Al

Nintendo Switch Kit'leri

Oyuna geri dönmek için hızlı bir düzeltme

Switch Kit'leri Satın Al

8 Cevap

Filtre ölçütü:
En Yararlı Yanıt

In this video I´m showing how to swap the backlight of an iPhone 7.

I had to do this repair because of the same problem,.... the cable was brocken.

VIDEO: iPhone 7 - Backlight, Home button, 3D touch repair

Block Image

Block Image

Block Image

Block Image

Block Image

Bu yanıt yardımcı oldu mu?

Puan 4
Yorum Ekle

That is the home button and 3D Touch cable.

There is nothing you can do to connect it back, but you can replace the entire display to make it work.

Currently there is a standing issue that some replacement screens do not work due to some issues of this cable/connector, but if you are careful and lucky enough, the replacement will work just fine.

Also,

DO NOT REPLACE THE HOME BUTTON.

USE ONLY THE ORIGINAL HOME BUTTON THAT CAME WITH YOUR PHONE

Bu yanıt yardımcı oldu mu?

Puan 2

Yorumlar:

Why shouldnt i change the original home button??

tarafından

Because it won’t work.

tarafından

Yorum Ekle

Remember the separate home connector cable on the 6 and 6 plus you could replace apart from the screen? This ran from the connector on the board, underneath the metal plate and to the home button flex itself. I'm assuming this is just that. Simply connects your home flex to the board itself.

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

I've assumed that it was an Touch ID extension cable. I am just curious how it runs underneath the frame. I also can't seem to find a replacement part even though the ribbon cable was very easy to rip. Even Forbes ripped it; http://www.forbes.com/sites/aarontilley/...

tarafından

On iPhone 6s/7, Touch ID cable is built into the 3D Touch panel. There is no way to replace just the cable, backlight plate or entire screen replacement is required.

tarafından

Yorum Ekle

It’s 3D function of the screen

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Hi, this one is Touch ID cable, it can be replaced with complete backlight module and cost about $30

Here is a link to this unit on eBay

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

That cable appears to be the back light/home button flex. the back light has adhesive around the edges and can be carefully separated from the LCD and replaced but you will need to unsolder the contacts on the remaining flex cable to remove the old back light flex cable.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

I am facing a similar issue(I guess), After a screen replacement my home button works fine, my screen works fine but there is something wrong with my 3D Touch, It just doesn’t registers a 3D Touch input(does not responds to my hard/firm press on the screen). Is there a way to test it ??

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

hi the ripped connector isn’t the LCD and Digitizer, if the LCD and Digitizer still works, then you have then ripped the Touch ID home button ribbon flex, if you replace the entire display assembly the home button will then work again, how i know is i had the same problem until i replaced the entire screen and mine is now fully working.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Anthony sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 39

Son 7 gün: 269

Son 30 gün: 1,231

Her zaman: 32,914