Ana içeriğe geç

Sixth iteration of Apple iPhone, announced on September 12, 2012. Repair of this device is similar to the previous models, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 32, or 64 GB / Black or White.

3417 Soru Tümünü görüntüle

iPhone5 stuck when I install front camera and sensor cables to board.

Hello,

I broke my screen and I replaced the screen and digitizer 1 year ago. I replaced it. It worked fine until last week. My phone's battery was swollen. So I bought a battery and install, it was simple.

When I tried to power up, it stuck at Apple logo. I worried and try to restore from iTunes. It gave error 4005, 4013, 4014... I searched and found some videos, explain the reason may be some defective components.

I started to disconnect connectors one by one, and bingo, it was front facing camera + ear speaker + prox sensor.

When I try while that connector disassembled, it powers up successfully. When I re connect the connector, it stuck.

Before replacing the battery, everthing works fine. I switched to old battery but didn't solve for camera and ear speaker problem.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

Replace the front camera ribbon cable assembly. It has gone bad.

Guide to replace:

iPhone 5 Front-Facing Camera and Sensor Cable Replacement

Where to get part:

iPhone 5 Front Camera and Sensor Cable

iPhone 5 Front Camera and Sensor Cable Görseli

Ürün

iPhone 5 Front Camera and Sensor Cable

$4.99

Bu yanıt yardımcı oldu mu?

Puan 4

Yorumlar:

Will it be the definitive solution? Is it a guess or fact?

tarafından

I can't answer that unless i have the device in front of me.

tarafından

'When I try while that connector disassembled, it powers up successfully. When I re connect the connector, it stuck.'

What else would it be really?

tarafından

Yorum Ekle

Yes you have to replace the front camera ribbon cable assembly, then only it will work bcoz once i replace the display by mistakely the front camera cable was got damaged and i start connect all the connectors the device was stuck and i replace the front camera cable assembly it worked for me, So pls try it

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

I bought a new camera ribbon cable assembly.

I will try tonight and let you know the result soon.

Thanks.

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

It worked. I replaced the full front camera ribbon cable and works fine.

tarafından

Great you did it nicely

tarafından

Yorum Ekle

Yanıtını ekle

Cagdas sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 50