Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Updated version of the 2015 Retina MacBook. Model A1534, EMC 2991. Released in early 2016.

98 Soru Tümünü görüntüle

Little yellow button on logic board - what is it?

MacBook Retina 12" Early 2016

My MacBook doesn‘t turn on after SMC reset. I've found on Apple pages that this can happen if you reset the SMC without your MacBook connected to its AC power adapter. I've also tried PRAM and SMC reset and nothing.

Black screen, no charging sound and battery picture when connecting to power supply.

I wonder what is this little yellow button on logic board for? Do any of you have a problem like me?

Does anybody know location of power on pads?

Block Image

Bu soruyu yanıtlayın Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 7

Yorumlar:

Pressing this button brought my MacBook back to life. It had died during attempted update to Catalina 10.15.6 and was completely unresponsive. After pressing the button 3 times 10 seconds each, and then powering up, the install completed successfully and the computer works fine.

tarafından

Yorum Ekle

The Essential Toolkit

The most helpful tools in our most compact kit.

Hemen Alışveriş Yapın

The Essential Toolkit

The most helpful tools in our most compact kit.

Hemen Alışveriş Yapın

2 Cevap

Filtre ölçütü:
En Yararlı Yanıt

As far as I can work out, it de-energises the battery rails.

I'm also looking for the power on pads. and can't find them. They're listed in the servicer manual though, so should be somewhere...

Bu yanıt yardımcı oldu mu?

Puan 2

Yorumlar:

Correct, always press this button (hold if 2016 onwards model) and wait for the light next to the battery to go out before disconnecting the trackpad cable, otherwise you can kill the MacBook (trackpad deals with G3H always on rails).

If it is dead after an SMC reset, take it to Apple and they should sort it if it isn't too old. If they are not helping, press this button on the logic board, then plug the charger in. If it is still not working, there is an issue with the logic board most likely.

tarafından

Also, you don't need to use the power pads. When this is de-energised, it will boot up by itself after the charger is plugged in

tarafından

Have you solved the problem?

tarafından

So, removing the trackpad cable will kill the mac, if I don't press that button first? This is nowhere in the disassembly guides. ARGH! Is there a fix? You mention taking it to Apple?

tarafından

How i can energise the battery rails again? i have pressed this button and macbook doesn't power on.

tarafından

Yorum Ekle

I did the same thing: I initiated a restart, then held down the “shift, control, option” keys and hit the power button without plugging it into . My MacBook never started back up, same as the above post.

I followed the plan that the original post: opened the computer and pressed the small button adjacent to the internal lcd power light with the computer plugged in to the wall outlet. The charging alert rang and I knew my computer was back to life.

Do follow the disassembly instructions on ifixit when you are removing the screws and removing the bottom casing. The flex cables are very delicate.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Wojciech Pawlowski sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 31

Son 30 gün: 136

Her zaman: 2,922