Ana içeriğe geç

Model A1418 / Late 2012 / 2.7 & 2.9 GHz Core i5 or 3.1 GHz Core i7 Processor

212 Soru Tümünü görüntüle

iMac won't boot. HD and FAN are spinning for 1 sec

Hi, When I power on my iMac I hear the HD and Fan spinning for 1 second. Then it stops and does the same thing over and over. 1 LED is steady the second LED lights up when the fan and HD start spinning. See pictures. What could be the problem? If the power supply would be damaged there shouldn't be power, LED or spinning HD and fan right (even when it's just for a second right?)

Block Image

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Here's a breakdown of what the diagnostic LED mean: Diagnostic LED's

From the sounds of it you have a logic board issue with the power regulator logic.

Do you have your system plugged into a surge suppressor or UPS? If not, you may want to get one, its even possible the suppressor is shot as over time it does lose its effectiveness.

Bu yanıt yardımcı oldu mu?

Puan 1

4 Yorum:

I've ordered a new power supply. Keep you posted.

tarafından

Replacing the power supply didn't solve a thing...

tarafından

I thought not, sadly this is a logic board issue as the regulators are there.

tarafından

What exactly do i have to change on the logic board?

tarafından

Yorum Ekle

Yanıtını ekle

Mattis sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 6

Son 30 gün: 7

Her zaman: 273