Eşyalarını Tamir Et Topluluk Mağaza

Apple iPhone 5s, 10 Eylül 2013 tarihinde duyuruldu. Bu cihazın tamiri, daha önceki modellerinkiyle benzerdir; tornavida ve plastik açma araçları gerekir. GSM ya da CDMA olarak, 16, 32, 64 GB kapasiteli Gümüş, Altın ve Uzay Grisi renklerinde mevcuttur.

3530 Soru Tümünü görüntüle

Seçenekler

Is it possible to buy an iPhone 5s screw set with labeled screws?

I can't seem to find one, but I would like to buy a 5s screw set where each of the screws are labeled by size.

I know I can buy the screw sets with all the screws mixed, but this isn't really gonna help me. I know that one screw in the wrong place can cause irreparable damage to the logic board.

Anything labeled as to which screw goes where, or just by screw size would do, then I can follow the ifixit guide and use the correct size screws for each step.

Thanks!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

iPhone 5/5c/5s/SE (1st Gen) Screw Set

Digital Caliper

iPhone 5/5c/5s/SE (1st Gen) Screw Set Görseli

Ürün

iPhone 5/5c/5s/SE (1st Gen) Screw Set

$9.99

Digital Caliper Görseli

Ürün

Digital Caliper

$39.99

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 6

11 Yorum:

@yumyab Nobody sits down and labels individual screws.

If the digital caliper is to expensive and you have good eyes, you can get a Boley gauge for $5.02 and free shipping here: http://www.ebay.com/itm/like/31075935636...

tarafından

@mayer You know, considering that we are concerned about screw length differences of only 0.1mm and that the consequence of mis-measuring said screws is killing the phone, I think it makes more sense to spend the extra 10$ and get a proper digital caliper that will give you the proper measurement.

Just MHO.

tarafından

LSD, it's not just for the hippies anymore!

tarafından

@theimedic You do mean LSI, right? Of do take LSD and sit and measure and label screws all day? Screwy!

tarafından

@mayer I tried that too! It was fun! But not much actual work got done! Also I can't find where I put many things!

tarafından

6 tane daha yorum göster

Yorum Ekle

Seçenekler

No, there isn't such set screws but you can measure it whit a micrometer.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Yanıtını ekle

yumyab sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 177