Ana içeriğe geç

Repair information and guides for the iPhone 6S Plus that was released on September 25, 2015. Model A1687, A1634

1041 Soru Tümünü görüntüle

iPhone 6S Plus Main Camera, 3D touch and flash light Not working

I have an iPhone 6S Plus with some issues. Main Camera and 3D touch Not working at all, flash light Not Working too. I checked the motherboard and I see sigh of water damage but everything else works fine. Do I need to replace any IC to solve this issue? What parts do I need to inspect with the microscope and test? Maybe some parts (like Resistors, Capacitors or IC) burned. I would appreciate your help. Thank you!!!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Clean the board and replace any bad components.

Bu yanıt yardımcı oldu mu?

Puan 2

6 Yorum:

I cleaned the motherboard, how can I find the bad parts; I can't see any clear damage with the microscope. What parts needs to test with the multimeter; maybe a chip needs replacement or some resistors-capasitors-filters

tarafından

Are any components blackened/burnt?

tarafından

I don't see any black components near the main camera connector

tarafından

What about pins on the connector? Are those burnt a little?

tarafından

no, seems it is ok. I think the problem is on the camera chip.

tarafından

1 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

johnfl21 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 196