Eşyalarını Tamir Et Topluluk Mağaza

Repair information and guides for the updated version of the 2015 Retina MacBook that was released in early 2016. Model A1534 / EMC 2991

139 Soru Tümünü görüntüle

Seçenekler

Trackpad/going to sleep not working after display replacement

I changed my display assembly and afterwords my trackpad started acting glitchy. After ensuring the connection was connected several times the trackpad completely stopped working. Also when the display lid is closed the computer does not go to sleep but I do notice a magnetic pull when closing. The keyboard works fine.

Any help would be appreciated.

Thanks!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Hello my name is Walker and it sound like your issue is a shorted connection between the trackpad and the logic board. This also my have been a issue within the trackpad it's self. The other issues you are having with it not sleeping would be the light sensor this means that you might have put the sensor in back word or just a little different than what it originally was.

If you have any questions about this please comment below. If this fixed your problems please give me a thumbs up thank you.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

2 Yorum:

Hi Walker,

Thanks, I ordered a new trackpad ribbon hoping that is the issue. If not then I may replace the trackpad. Would you happen to know where the light sensor is?

Thanks again!

Abdul

tarafından

The light sensor is typical the same on all Apple Mac books this will help you find it https://d3nevzfk7ii3be.cloudfront.net/ig...

This should be the same thing that you see.

tarafından

Yorum Ekle

Yanıtını ekle

Abdul R. Taleb-Agha sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 114