Ana içeriğe geç

Repair information for the first generation Apple iPad available in Wi-Fi and 3G versions with 16, 32, or 64 GB of storage. Released on April 3rd, 2010. Model numbers: A1219 and A1337.

266 Soru Tümünü görüntüle

Can I modify an iPad and increase the memory to 128GB?

If I disassemble an iPad, is it possible to replace the internal flash mass memory with a 128GB Samsung SSD 1.8"? what is kind of the iPad's flash mass memory? does the quality of the internal multimedia decrease? Would iTunes support the modified iPad? Would I be able to install the iOS 4.2? Thanx for the answer.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
1 Yorum

This question was migrated from http://meta.ifixit.com/.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

No. The NAND flash is soldered to the main board, and it does not have an interface that's compatible with an SSD (or space inside for a drive).

It is hypothetically possible to replace the flash chips with larger capacity chips, but that would require a sophisticated surface mount de/soldering setup. In English: a semiconductor company could do it, but probably not an individual.

Bu yanıt yardımcı oldu mu?

Puan 2

1 Yorum:

There is a bunch of equipment on Ebay, for a 150$ which helps u to do it fast and easy. Depend on your will, and manual capabilities. Videos on facebook, and YouTube also. Approximately an hour job

tarafından

Yorum Ekle

Yanıtını ekle

Francisco sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 10,873