Eşyalarını Tamir Et Topluluk Mağaza

Mid 2012 model, A1278 / 2.5 GHz i5 or 2.9 GHz i7 processor.

1623 Soru Tümünü görüntüle

Seçenekler

No power, dim green/orange on magsafe mbp 13 mid 2012

Hi, i have a mbp 13 that not doing anything, no power, no fan, no battery indicator, i try everything like disconnecting the bat, push the power for xx seconds, i charged the battery in other mbp, put it back and still without respone (only 1 time the magsafe green light got blinking bright but then started to dim and back how it was before)

So i don't know what to do :(

Edit: i was checking some voltages and it doesn't look very good, also some times i can hear a ticking noise coming from the logic and its in the same time that the orange light flicks in the magsafe connector

820-3115-b

PPBUS_G3H, 9.51v

Pp3v42_g3h, 0.11v

Pp5v_s5, 4.92v

Pp5v_s3, 2.66v

Pp3v3_s5, 0v

Pp3v3_s3, 0v

Smc_bc_acok and ADAPTER_SENSE not present

Chgr_acin 0v

I have checked other voltages butni dont have here right now

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

After you charged the battery up in the other machine, did you check it with Coconut Battery or other APP to see how much of a charge it actually has?

http://www.coconut-flavour.com/coconutba...

With the new battery in does the battery test indicator show anything?

Disconnect the battery and Mag-Safe adapter. Then reconnect both and you should get a spontaneous reboot.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

3 Yorum:

I didn't check with coconut battery but the other mbp was working good with the magsafe disconnected, intry disconectect bat and mag, recinect both and nothing happend, only the dim green/orange light flicking in the magsafe conector, i checked some voltages in the logic and it doesn't look good

820-3115-b

PPBUS_G3H, 9.51v

Pp3v42_g3h, 0.11v

Pp5v_s5, 4.92v

Pp5v_s3, 2.66v

Pp3v3_s5, 0v

Pp3v3_s3, 0v

Smc_bc_acok and ADAPTER_SENSE

Not pressent

Chgr_acin 0v

I have checked another voltages but i dont have here now

I don't know where to start

tarafından

That's not supposed to happen. Please give us a complete history of the machine, Spills, repairs, upgrades or other changes. Plus were there any warning symptoms ?

tarafından

I bought with these problem, it says that it was water damage, but i didn't find anything wrong in visual check, but i put the logic in isopropilic alcohol, clean everything, dry and plug.. and thats all the history that i know (sorry for my English)

tarafından

Yorum Ekle

Seçenekler

PP3V42_G3HOT should be 3.42V resolve this first .

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Nicolas sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 542