Ana içeriğe geç

Released October 24, 2011 / 2.2, 2.4, or 2.5 GHz Quad-core Intel Core i7 Processor

405 Soru Tümünü görüntüle

Device booting to black screen

I restarted my macbook and just after the apple logo appeared there were some flickering lines on the screen and then just a row of vertical red lines. I turned it off and attempted to reboot it but now all that happens is the optical clicks and the front indicator light comes on. Otherwise it's just a black screen, no boot tone.

I attempted reseating the RAM, both slots, a PRAM, SMC reset, and manually removing the battery. I also booted it with no RAM in it and got the beep tones so I believe my logic board is alive.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Logic board has failed - based on the vertical lines and unable to boot.

Check out the last paragraph of this page: https://www.apple.com/support/macbookpro...

The late 2011 15" have known logic board issues and actually had a recall on them. Might be worth calling apple and seeing if they will replace it still even though they ended the program.

Bu yanıt yardımcı oldu mu?

Puan 2

2 Yorum:

It was discovered a tantalum capacitor was degrading that was the root issue. Apple placed it too close to the GPU so it tended to cook a bit. Review this answer: Problem with NVIDIA GeForce GT 330M 256 MB?

tarafından

Interesting. Thanks for sharing!

tarafından

Yorum Ekle

Yanıtını ekle

Dirk Gunderson sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 416