Ana içeriğe geç

Model A1001 or A1025 / 667, 800, 867, or 1.0 GHz G4 processor

50 Soru Tümünü görüntüle
Soru Kapandı

PowerBook G4 Titanium DVI Eject Problems

Hey, as you know I got the PowerBook working. But the is a problem. when I inserted a disc (trying to install new software) and tried to eject it, it just loaded up again( I pressed the eject button and it disappeared and then booted back up. Any ideas to get it out? Reply back.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

4 Cevap

Filtre ölçütü:
Seçilen Çözüm

Another way is to type "drutil eject" (without the quotes) in terminal.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle
En Yararlı Yanıt

From the way you describe it "loading up again", it sounds like the CD is finding resistance as it ejects, and so it goes back into the drive. This is very common. If this is the case, I'd remove the bottom casing of your machines (very easy -- just remove the screws and pull the bottom off) and from there you can manipulate the elements which would be blocking the optical drive.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Try booting up the laptop while holding down the trackpad button.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

The easiest way to eject any disk from a Powerbook is too hold down the mouse button when starting the computer. This has been in the OS since Mac OS 8.5. I have used this several and have told others with success every time.

Walter

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 963