Ana içeriğe geç

16 Eylül 2016'da satışa sunulmuştur. Model 1660, 1778 GSM ya da CDMA olarak 32, 128 ya da 256 GB kapasitelerinde ve Altın Gülü, altın, gümüş, siyah ve simsiyah renklerinde satılır.

2261 Soru Tümünü görüntüle

iPhone 7 freezing after screen repair

Hi, i work at a phone repair shop and i constantly have iPhone 7s that come back with a problem where they will be using the device and randomly the screen will freeze and they will have to shut it off and turn it back on. It only starts happing after the repair. was curious if this is a known problem and if it could be a repair oversight or faulty parts?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 4
Yorum Ekle

7 Cevap

Filtre ölçütü:
En Yararlı Yanıt

I have brought this to the attention of many parts suppliers and this link will give you everything you need to know. This is why apple has a calibration machine, The iPhone 7 through 8 plus will experience this due to 4 separate manufactures of screens, LG, Toshiba, Sharp, and JDI. If your screen does not match that it will need to be calibrated with the machine or it will not communicate properly. Best solution is to check the first 3 characters on the screen and try and find one that matches the original.

'''https://webuylcds.co.uk/2018/05/15/to...

Bu yanıt yardımcı oldu mu?

Puan 3

1 Yorum:

Or use eprom reprogrammer for 50$

tarafından

Yorum Ekle

Restart your iPhone 7(press and hold power button and volume down untill you see the Apple logo),if this still not work, backup your iPhone and do a factory reset.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

It worked. Thank you.

tarafından

Yorum Ekle

Sounds like a screen quality issue. Have you tried different screens?

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

i also work at repair shop and having same issue , dont know what is it yet ................

annoying thing is customer are having problems because of my service :(

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

If each time it's the same thing, it's due to bad quality LCD. Buy a new lot of LCD.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

My screen is on, but it doesn't respond when you tap, slide, or try other gestures. Wont even let me slide the power button off nor let me enter my passcode. Could i just need a whole new screen?

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

You need new screen

tarafından

Yorum Ekle

Please don’t read comments from others… EPROM reprogramming needed. This is the only real and working solution. Costs 50$


https://www.youtube.com/watch?v=Uv4BDpWf...

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Arima sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 3,802