Ana içeriğe geç

A Samsung Series 3 PC, the NP300E5C-A09US is a 15'' laptop with a 1366x768 screen resolution. It is a great choice for anyone looking for a lightweight, yet powerful portable computer.

18 Soru Tümünü görüntüle

How can I fix my laptop logo/boot loop?

When I start up my laptop the samsung logo comes up and after a few seconds goes to a black screen and a few seconds later it goes back to the logo and it keeps repeating this forever. I have tried many of the common BIOS keys and none of them brought up anything.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 2
2 Yorum

Have you tried to use a usb with a bootable window?

tarafından

Hi!

I have the same problem, and with some googling, it came out that the NVRAM (which is located in the bios) is corrupted. (In my case, it corrupted when I installed linux, as documented on many forums.) Unfortunately, the only fix is to buy a new bios chip and replace it.

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

Take out battery:

Samsung NP300E5C Battery Replacement

Try resetting BIOS:

https://www.youtube.com/watch?v=UXDZXDif...

I would ignore the desoldering part and just remove the CMOS “coin” battery, to the right ,top of video before where he does the desoldering.

This will help with disassembly - clearer than video:

Samsung NP300E5C-A09US Motherboard Replacement

Samsung NP300E5C-A09US Battery Görseli

Kılavuz

Samsung NP300E5C Battery Replacement

Zorluk:

Çok kolay

1 minute

Samsung NP300E5C-A09US Motherboard Görseli

Kılavuz

Samsung NP300E5C-A09US Motherboard Replacement

Zorluk:

Orta

20 minutes - 1 hour

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Hi @gcb140

My bet is your Hard Drive is having problems. You can try to reinstall windows using a recovery disk but if it continues to fail, you may need to replace the Hard Drive.

Bu yanıt yardımcı oldu mu?

Puan 0

2 Yorum:

I am having the same problem but after I replaced the hard drive and RAM. Boot loop, won't even POST, can't get into BIOS. Won't boot from DVD drive or Hiren's through USB.

tarafından

After you've replaced the Hard Drive, you will need to reinstall an Operating System for the computer to recognize the Hard Drive as a boot device. Follow these instructions to start the process:

https://community.spiceworks.com/how_to/...

You will need a bootable flash drive with your Operating System installer on it to reinstall successfully.

tarafından

Yorum Ekle

Yanıtını ekle

Grant B sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 8

Son 30 gün: 41

Her zaman: 3,149