Ana içeriğe geç

The third-generation HTC One smartphone which was first released in March 2015. Its major revisions on the M8 design include the octa-core Snapdragon 810 processor and a 20-megapixel rear camera.

71 Soru Tümünü görüntüle

Phone Won't Turn on

I just replaced my digitizer and now the phone will not start. It shows an orange led in the speaker when charging but that's the only sign of life it has. Is there a connector I could've missed? Any ideas?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

The screen itself uses a single LCD ribbon cable where the digitizer is together plugged into.**

Double check if the LCD ribbon flex cable is plugged in fully.

Bu yanıt yardımcı oldu mu?

Puan 3

2 Yorum:

Only one cable connects to the motherboard correct? The second cable is already attached to the "main" cable that you plug into the motherboard. The "main" cable is fully plugged in.

tarafından

You are right. I haven't done a HTC One M9 screen replacement in a long time. I have like 3 screens sitting in the stock.

Orange LED indicator means the phone can most likely switch on after it has sufficient charge.

Have you tried holding power button until it vibrates when on the orange charging led?

You should be able to hear sound from it when it boots up (unless you put the phone in silent mode).

tarafından

Yorum Ekle

Yanıtını ekle

Logan Green sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 672