Ana içeriğe geç

Early 2011 model, A1278 / 2.3 GHz i5 or 2.7 GHz i7 processor.

737 Soru Tümünü görüntüle

Why MacBook Pro Early 2011 crashes during Macos Sierra install

My Macbook pro crashes during sierra installation. I took the hard drive out and installed it on another mac but the problems continued after I put it back in the machine:

pictures below of the kernal panics;

Block Image

Block Image

Could this be GPU or CPU failure?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1

Yorumlar:

It was the Ram that was bad in mine. Not the data cable

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

This sounds like a bad HD SATA cable.

Here is the IFIXIT guide you'll need to follow: MacBook Pro 13" Unibody Early 2011 Hard Drive Cable Replacement

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

Do you think replacing the hdd cable will solve the random crashes and kernel panics?

tarafından

This series had a big problem with the SATA cable. I would recommend replacing first. Here is the part you want: MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable this is the newer better version. I would also apply some tape on the uppercase where the cable sits.

You may need to reformat the drive and apply a fresh copy of the OS as well as the files may have some corruptions which is why you're getting panics.

tarafından

Yorum Ekle

Well? Did the new SATA cable fix the issue?

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

I'm sure it did ;-}

tarafından

I substitute the 2012 cable instead of using the 2011. Occasionally I have to mod the hard drive retains bracket.

tarafından

Yorum Ekle

Yanıtını ekle

Dea200 Farr sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 566