Ana içeriğe geç

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Soru Tümünü görüntüle

iPhone 6 with no image after screen replacement

I've been fixing iPhones for a while now with no problem. This time that I fixed it for a friend i replaced it with no problem it turned on and everything and about a week later the phone just went black but it is recognized when I connect it to iTunes. Could it be the logic board that was damaged? The phone has never been wet either.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

4 Cevap

Filtre ölçütü:
Seçilen Çözüm

Have you checked the connector on the logic board? Check whether it is in good condition and clean it with Alcohol cleaning fluid to have a try.

Bu yanıt yardımcı oldu mu?

Puan 2

2 Yorum:

I will try this thank you

tarafından

After trying this multiple times it finally worked

tarafından

Yorum Ekle

Can you verify if it's no image or no backlight? Try shining a light on the screen and see if you can see anything. If so, it could be a problem with your backlight circuit.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

There was light at first looked kind of purple but then just went out

tarafından

Yorum Ekle

This happend to me but on a different phone. The screen is broken talk with your seller

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

I thought it might be that too but i tried 3 different screens and one original that just had a crack

tarafından

Yorum Ekle

how you fixed your problem? please tell me, I have same problem

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Alex sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 562