Ana içeriğe geç

The tenth generation Corolla (E140/E150) was released in Japan in October 2006. A narrow variant was available in Japan while wider versions were sold internationally.

17 Soru Tümünü görüntüle

Repairing Air Injection valve (Error Code P2440)

I have a Toyota Corolla XRS 2006 Which has around 180 000kms on it. The engine light turned on so I took it to a mechanic and he told me that the error code was P2440 which was for the air injection valves near the motor. I looked around the internet and saw that there were ways to fix it but not a detailed enough one for me to follow. I have mechanical experience but I would like to try and fix it.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

I don't have any mechanical guidance for you, but I did a bit of googling.

Here's how to clean that valve:

And this is a diagnostic for a similar, P0505 error.

Also try poking around for solutions to P2441.

The only difference between P2441 and P2440 is that in the P2440 the SVS is stuck open instead of closed.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Ickaron sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 10

Son 30 gün: 39

Her zaman: 2,732