Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Model A1136 / 30, 60, or 80 GB hard drive / black or white plastic front

931 Soru Tümünü görüntüle
Soru Kapandı

Click wheel doesn't work after headphone jack replacement

After, to all appearances, successfully swapping out my headphone jack (according to this page: iPod 5th Generation (Video) Headphone Jack & Hold Switch Replacement), my click wheel doesn't respond at all (it was working fine before). The iPod powers on and brings up the main menu normally, and the display brightens when the hold switch is toggled, but nothing else responds. Did I dislodge something in the face? Thoughts?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

Yorumlar:

The funny thing is that the iPod still powers on when I press Menu, and it resets successfully by toggling hold switch/holding down Menu and the center button. But nothing else works, I'm stuck at the main menu.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:

Yeah i'd open it up and see if you left anything disconnected/askew.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,507