İtibar: 13
4
I changed the display screen with new one, turned on and get a white screen? checked all connections, even plugged in broken screen and it still lit up on part of glass not cracked. any ideas?
Bu iyi bir soru mu?
İtibar: 13
4
The original screen had a small crack after falling off a desk and the bottom half of the screen was not working. Ordered a replacement screen and the replacement screen was faulty.
Bu yanıt yardımcı oldu mu?
İtibar: 685,3b
3,4b
1,1b
2,6b
surely this is a software problem. Try starting up from an external USB device with a known good system on it. If it boots, run Disk Utilities from the external drive and see if that will do the trick.
Bu yanıt yardımcı oldu mu?
İtibar: 5
1
Maybe you have not connected all the wires. If it is not of this then you will need programming pairing which only Apple does, and because you replaced the screen yourself they may not do it because it is Apple .
Bu yanıt yardımcı oldu mu?
Never heard of that before. There is no programming a screen.
I like to see some validation of this programming pairing. Could you give us a link?
Son 24 Saat: 3
Son 7 gün: 4
Son 30 gün: 5
Her zaman: 201
2 Yorum
What happened with the previous screen to need a replacement ?
arbaman tarafından
Daughter dropped off desk and cracked the screen, ultimately had to send to Apple and was fixed
herrky tarafından