Ana içeriğe geç

The Nintendo 3DS XL 2015, marketed as the New Nintendo 3DS XL, was released October 11, 2014 in Japan and February 13, 2015 in North America.

367 Soru Tümünü görüntüle

Why my R4 doesn't start? (White Screen) System 11.6

Hello, I have taken my new R4 Just yesterday, I already put the update firmware (11.5) from the official site... the only thing is that it dose not work!! I want to know if i need the official site to release the update version (the 11.6) or if there are other method to make it work.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 4
3 Yorum

Hi!

Are you sure the card works? Don't you have to set your 3DS system to auto-launch any game-card based software upon boot to launch the CFW? This is how that works on the DS Lite at least, on my friends R4i Gold which I set up...

tarafından

I don't think this is gonna work, the problem is that, when I press the icon "bomberman Land" (the R4 icon) the only thing that it's show me it's a white screen.

tarafından

I think you need to install the firmware on to the card. You would have to format your micro SD card and download the firmware and copy it to the micro SD. A good source for firmware is https://www.r43ds.org/pages/R4-3DS-Firmw... as that page has firmware for a lot of the r4 cards. Check their photos and download the correct firmware

tarafından

Yorum Ekle

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

Ahm, emh...... never mind, i found out that I need to format the microSD card with an SD card (SD Card Formatter) than it's start working. Thanks Anyway

Bu yanıt yardımcı oldu mu?

Puan 2

4 Yorum:

after hours, THIS WORKS, THANKS SO MUCH !!

tarafından

Work for me too. I use this program to format micro sd card:

https://www.sdcard.org/downloads/formatt...

tarafından

I have a question.... Are you god ? Because it works !!!!!!!!!!!!! OMG thanksss

tarafından

After using ntrboot successfully and then afterwards trying to flash my backup of my R4 Gold card, I eventually got it by using the 'R4 SDHC family' option in ntr boot to get the card to read again. But it was still booting to a white screen after putting my backup files back on the sd card for the R4. After doing this step and using these specific formatters, my R4 card is now finally back up and running again! Thank you so much for these suggestions!

tarafından

Yorum Ekle

I have updated the latest firmware but still get a white screen

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

Format your micro sd card with this program:

https://www.sdcard.org/downloads/formatt...

tarafından

Yorum Ekle

Help please I have a similar issue except all I did was buy a micro sd to sd adapter and try to add some roms then I took the roms off and it still won't boot just a white screen

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

Format your micro sd card with this program:

https://www.sdcard.org/downloads/formatt...

tarafından

Yorum Ekle

Yanıtını ekle

RuberFF sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 9

Son 30 gün: 82

Her zaman: 32,715