Ana içeriğe geç

Released April 2010 / 2.4, 2.53 GHz Core i5 or 2.66 GHz Core i7 Processors

591 Soru Tümünü görüntüle

backlight fuse went out. need replacement link

I was replacing my LCD screen on my macbook pro and mistakenly unplugged the LVDS connector from the LCD screen when the laptop was on. i used a difference LVDS connector and still no luck. Looks like i burnt out the Backlight Fuse, as the screen slowly went dim and then completely black. If i shine a flashlight on the back i can see the screen. So the backlight is not working.

Do you know what fuse type i need to buy to replace it? i can't find it on digikey.com. can someone please post a link of which fuse i need. thanks!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:

Just because the backlight isn’t working doesn’t mean it’s the fuse you will likely need to go through the schematic probing voltages till you find the culprit. F9800 is the fuse it’s on the back of the board kind of parallel to the space between the 2 USB ports, half way to the fan cut out and below two larger capactors in a group of 4 similar sized resistors and capacitor.

it’s far easier to find the location using board view software for 820-2850.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Raj sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 83