Eşyalarını Tamir Et Topluluk Mağaza

Released October 24, 2011 / 2.2, 2.4, or 2.5 GHz Quad-core Intel Core i7 Processor

405 Soru Tümünü görüntüle

Seçenekler

Mac wont start up, both fans spin for 2 secs, Sleep LED blinks once

last 4 of serial # DV7L

When trying to power up with power button :

- Mac starts

- Both fans spin for 2 sec

- Sleep LED blinks once

- all shuts off, cycle repeats without pushing power button on

Battery indicator full. When I unplug battery with adapter attached, Mac wont react at all.

Tried different RAMs, HDDs, SSDs. Reseting SMC, NVRAM, 20sec battery unplug - no luck.

Any of you guys had smth similar with POST ?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
1 Yorum

Does the logic board show any signs of liquid damage?

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Disconnect the mag-safe, disconnect the battery. Press and hold the power button for 10 seconds. Reconnect battery, reconnect mag-safe and tell us if it booted.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

4 Yorum:

Tried it, disconnected Magsafe and battery, pwr button hold for 10sec. Reconnected Magsafe - fans spin instantly without pushing pwr button on. Pushing power button on, doesn't change anything.

No liquid damage visible.

tarafından

It should have restarted spontaneously after doing that. Your repeated procedure is NOT the sequence I told you (what about the battery)?

tarafından

tried it now, exactly as you suggested - no changes

tarafından

I am at a loss on this one. I have never seen one that wouldn't boot with this method that didn't have liquid damage. Sorry, maybe @danj has an idea.

tarafından

Yorum Ekle

Yanıtını ekle

Hubert H. sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 81