Ana içeriğe geç

The Panasonic Lumix ZS50 is a small, lightweight personal travel camera, released in March 2015. The ZS50 features a long lens (30x zoom, 24-720mm), heightened low-light sensitivity, built-in viewfinder, and a 12.1 megapixel resolution.

7 Soru Tümünü görüntüle

When I zoom in a little, the view becomes blurred.

At first, the view is in focus. After I begin zooming in very much (yes, I can hear the motor) the photo view becomes blurry. (I see 1.6 across the screen) If I try zooming back out all the way, the photo view stays blurry; however, if I turn off the camera and on again, the photo view again is clear until I try zooming in very much I have reset to factory and that did not change the problem. Yes, I am a novice.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

If your camera is on AF-S, half-press the shutter button to refocus. If it is in AF-C, it should focus automatically, but always half-press the shutter button before taking the picture to be sure the picture is in focus. Be sure pre-focus is on if your camera has that setting.

Here is the manual if you need any help:

ftp://ftp.panasonic.com/camera/om/dmc-zs...

Hope this helps!

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Sara Thomas sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 10

Son 7 gün: 114

Son 30 gün: 124

Her zaman: 1,254