İtibar: 33
3
1
For those expert repairers and biz owners: What type of diagnostic equipment would you recommend to start an electronics repair business? for instance to fix iphones, tablets and laptops. Besides DMMS, Scopes, and basic soldering and calibration tools, are there specialized types of equipment to diagnose non-obvious faults on electronic devices that you would recommend? Thanks for the feedback again!
Bu iyi bir soru mu?
İtibar: 10b
15
29
4
hey,
Hetco, air gun. SMT Max is a good line.
Mobile dryer. (i use RG-202F)
Drivers of various types and sizes related to the types of devices you will use.
Side cutters
Pliers
Compressed air
Tweezers
Hot plate.
Multimeter
Battery load tester
Sonic Wash
That should get you going to start
Bu yanıt yardımcı oldu mu?
Thank you for the comprehensive list.
Son 24 Saat: 0
Son 7 gün: 5
Son 30 gün: 6
Her zaman: 372
3 Yorum
dc bench power supply and usb volt / amp meter
daniel tarafından
@emasterstudent besides all the tools listed in the answers you will need the schematics boadlayout files etc. to work on any device. Only then wil you know what component is where and what rails they belong to etc. Can't use any tool unless you have "a map" of where to use them. Best people to answers this completely would be @refectio and @teetopp
oldturkey03 tarafından
great feedback...thanks!
Oscar Rodriguez tarafından