Ana içeriğe geç

Repair guides and support for C/K pickup trucks sold by General Motors under the GMC brand, including the GMC Sierra.

77 Soru Tümünü görüntüle

Turn signal and running lights don't work

Just recently had a new steering column put in and I've been having problems with the lights shortly after. TS do not come on front and rear along with running lights. TS lights do not come on or show on the dashboard when engaging to signal.. any help would be a blessing

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Fuses. Check which fuse controls these circuits and check if its blown, if it is replace it. If it blows instantly, when you got the steering column replaced, one of the wires got pinched and is shorting to ground. If that isnt the case, whoever put the column in probably damaged a wire or didn't plug a connector in during the process, so if thats the case, you should take it back and have the person take a look.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Austen sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 68