Don't know how it happened but I went to remove my stylus and only 1/2 came out! I broke in the middle not at the seam between the body and the head. Thinking about super glue and a strong piece of wire unless someone has a better idea.
Bu iyi bir soru mu?
İtibar: 102,5b
18
191
304
You could try screwing a long screw into the broken stylus just enough to grab hold and pull out
Bu yanıt yardımcı oldu mu?
I took a drill bit and a dab of super glue. Make sure its completely dried b4 putting the pen back. Good luck.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 1
Her zaman: 996
1 Yorum
Thanks Jim, I had thought about that and wanted to wait to see if anyone came up with a better solution, nobody did so I went ahead and found a #10 2.5" long drywall screw, had to try 3 time before I got a good enough grip then POP it came right out! Thanks!
Don Gockel tarafından