Eşyalarını Tamir Et Topluluk Mağaza

Model A1010 or A1104

99 Soru Tümünü görüntüle

Seçenekler

Why is my new Hard Drive not seen by Disk Utility?

I wish to replace the fully working 120GB HD with the upgrade 320GB WD3200BEVE drive to gain capacity.

When I fit the new blank HD, fresh from WD, and boot from a system DVD, the HD is not seen by System Profiler or Disk Utility.

I have used the same HD cable and this is the second drive with the same problem. If I refit the 120GB HD the machine works as normal.

I have checked for Firmware updates, there don't seem to be any for this machine.

Any advice please?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Well I fixed my own problem.

The previous owner was a tinkerer like us, and had fitted an HD ribbon cable which worked with a 120GB HD, but not with a larger drive. It may be faulty, or from another model. When I fitted a different cable 'borrowed' from another PB the new 320GB drive was seen as expected.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Yanıtını ekle

Cameron sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 895