Ana içeriğe geç

LCD shield plate screw size

The tools list for the 6 plus screen replacement guide specifies a phillips #000 screwdriver, but I’ve seen many sources (including the ifixit guide) that indicate #00 sized screws for the LCD shield plate. I can't get these screws out. Can someone please confirm for me the actual size of the LCD shield plate screws? Also, I see the screwdrivers come in a blunted tip and a pointy tip version. Which should I get?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

Hello,

you need Phillips #000 Screwdriver. You can buy it at Ifixit and if you buy tools from Ifixit you gain lifetime warranty and for phone parts it's mostly 1 year. So if you are buying i advise Ifixit (links below). Also link for iPhone 6 LCD Shield Plate Replacement.

iPhone 6 LCD Shield Plate Replacement:

iPhone 6 LCD Shield Plate Replacement

Phillips #000 Screwdriver:

Phillips #000 Screwdriver

Or the whole toolkit:

Essential Electronics Toolkit

Phillips #000 Screwdriver Görseli

Ürün

Phillips #000 Screwdriver

$5.49

Essential Electronics Toolkit Görseli

Ürün

Essential Electronics Toolkit

$29.95

Bu yanıt yardımcı oldu mu?

Puan 0

2 Yorum:

Thank you. I would still like to get feedback from others as there is conflicting information on this site.

tarafından

136 users completed this guide and for all of them it worked.

tarafından

Yorum Ekle

Yanıtını ekle

Sidney Burton sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 957