How can I fix a DS Lite that does not maintain its top case position?

Question

Nintendo DS Lite

This Nintendo DS Lite was released in 2006 as the successor to the Nintendo DS. Getting inside this device is simple, making for easy fixes.

314 Soru Tümünü görüntüle

Dade Aka @dadeaka

İtibar: 1

Gönderildi: 26 Şub 2018

Seçenekler

How can I fix a DS Lite that does not maintain its top case position?

I would like to repair my old DS Lite that felt on the ground many years ago. It still works but now it has a hole which reveals its hinge. The problem is that when I open the DS Lite to play its top case won't stay in position, infact I can't hear any "crack" that usually it does when the top part locks to stay in that specific position.

Which parts have I to buy to fix it?

Here are some images:

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

Yorum Ekle

2 Cevap

Seçilen Çözüm

jayeff @jayeff

İtibar: 448,1b

11

366

1,4b

Gönderildi: 26 Şub 2018

Seçenekler

Hi @dadeaka ,

It looks like the upper case will have to be replaced.

Here is a link to the ifixit Nintendo DS Lite Upper Case Replacement guide, which should be of some help.

Here is a link to a supplier of parts for the device. (scroll to the bottom to find upper case parts). It is not a recommendation to use them. It is shown to give an idea of the cost of the part.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 1

3 Yorum:

Good luck finding a screwdriver that small! Lol

Technical Difficulties tarafından 27 Şub 2018

Hi,

I might have the last laugh

Tools required:

Phillips #00 Screwdriver

Tri-point Y1 Screwdriver

jayeff tarafından 27 Şub 2018

Can I just ask, when the OP says the top case doesn't stay in position, do you mean it is really floppy? My DS has no resistance at all to keep the screen in place. I just wondered if replacing the upper case will resolve this issue too? Thanks

Gary Ogilvie tarafından 27 Oca 2019

Yorum Ekle

Hi,

I might have the last laugh

Tools required:

Phillips #00 Screwdriver

Tri-point Y1 Screwdriver — jayeff
Can I just ask, when the OP says the top case doesn't stay in position, do you mean it is really floppy? My DS has no resistance at all to keep the screen in place. I just wondered if replacing the upper case will resolve this issue too? Thanks — Gary Ogilvie