Eşyalarını Tamir Et Topluluk Mağaza

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Soru Tümünü görüntüle

Seçenekler

iPhone recognized by itunes, but screen, speaker, buttons don't work

Hi,

I got an older iPhone 6 from a customer that traded it for a newer one. The problem is, that the screen is black, and have tried with another screen to no avail.

The iPhone gets recognized by itunes, but it doesnt react to home+lock button press for resetting, and the mute button does not activate the vibrator.

The speaker is also mute.

Can this one be saved? Are there too many things burned on the logic board to get fixed, or are there some easy tests to perform to make it work?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

I think you answered your own question, if the logic board has a lot of burnt out parts then the phone would only be good for that - Parts.

Things like the ear speaker, charge port, front camera sensor, home button etc would work on working phones. But most likely not that one

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

1 Yorum:

But is does not seem like the phone has had any water damage and looks very clean inside - the only way to really test, i guess, is to move the board into a phone with the internals working?

tarafından

Yorum Ekle

Seçenekler

Check if the phone is showing image but no backlight.

You can check this by shining a flashlight on the middle of the screen while the phone is turning on at the apple logo part.

If it's displaying image and no backlight then the issue lies within the backlight circuit of the logic board which requires microsoldering to fix the issue.

Also this can be a case of long screw damage / damaged screen connectors on logic board.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

3 Yorum:

I can try that. But how come it doesn’t respond to any of the buttons?

tarafından

Phone could be on silent, with sound and vibrate turned off. So it's hard to tell if the buttons work or not.

Try plugging the phone into a charger with the vibrate / mute switch turned off.

You should be able to hear a charging sound when you put your ear next to the loudspeaker filter located at the bottom right of the phone.

tarafından

There is absolutely no sound or vibrtation, not even when you plugin the cable nor enabling/disabling the mute switch

tarafından

Yorum Ekle

Yanıtını ekle

Carsten Panch Isaksen sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 47