Ana içeriğe geç

4-inch iPhone released in March 2016 with similar hardware specifications to the 6S. Available in Silver, Space Grey, Gold, or Rose Gold with 16/32/64/128 GB storage options. Model: A1662 and A1723

1046 Soru Tümünü görüntüle

iPhone SE won't display after lightning connector replacement.

So I was wondering if I could get some advice. I opened up and replaced the lightning connector on the iPhone, but after testing it the headphone jack wasn't working. So I decided to open the iPhone again to see if there was a problem with which I installed the connector I found none. The problem is now the screen won't turn on and I have no idea if the connector got messed up or the screen is broken. I connected the iPhone to my laptop and iTunes detects the iPhone and even it's name, but I haven't been able to get any other response. I am stumped as to what the problem could be has anyone else had a similar issue?

P.S. I noticed that the cable battery cable seems to have some 'styrofoam' looking part in it and I don't know if it's relevant.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

Hey have you tested a hard reset?

Hold power button and home button the same time up to a minute, relese when you see the apple logo.

If that dosent work, I would open it up, relse the plate over the connectors for the battery and lightning and look if anything looks damaged on the board

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Eli sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 32