Eşyalarını Tamir Et Topluluk Mağaza

16 Eylül 2016'da satışa sunulmuştur. Model 1660, 1778 GSM ya da CDMA olarak 32, 128 ya da 256 GB kapasitelerinde ve Altın Gülü, altın, gümüş, siyah ve simsiyah renklerinde satılır.

2264 Soru Tümünü görüntüle

Seçenekler

iPhone 7 No front camera plastic holder/bracket/clip in replacement

Hi all,

I'm currently in the process of replacing the screen on my Iphone 7. Starting to reassemble the front camera and noticed that the replacement screen doesn't have the two plastic holders/brackets for the front camera and proximity sensor (see link) like my old screen does. Is this going to be a problem? Is it possible to transfer them over from the old screen (they seem to be stuck on there pretty tightly...)? If I have to purchase these how do I attach them, would an adhesive of some kind be necessary?

Thanks in advance

In case you don't know which parts I mean!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 2
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

You could try to reassemble the Front Camera flex without these brackets to see if everything lines up correctly (test the sensors). The risk is that as the phone gets jostled or dropped, the sensors and camera may move out of alignment.

You can order the brackets separately and stick them in place with a tiny drop of liquid adhesive. You need to make certain that the adhesive doesn't get on the window .

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

Use an isesamo to carefully pry those off. Heat on the front side of the screen may be helpful.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Yanıtını ekle

Kyrra Rhyannon sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 413