Eşyalarını Tamir Et Topluluk Mağaza

Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

1364 Soru Tümünü görüntüle

Seçenekler

iPhone 7 Plus won't turn on after battery & charging port replacement

I bought this iPhone 7 Plus from eBay that said that the phone was dropped in water and it has refused to turn on ever since. So when I received the item, I place the logic board in isopropyl 91% alcohol and let it evaporate for a couple of days. Then I replaced the charging port and the battery of the phone. However, the phone still doesn't turn on. iTunes doesn't recognize the phone either. What could be the problem?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

it is liquid damaged, placing it in ipa for a few days won't work it needs ultrasonic cleaned and there possibly damaged components

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

2 Yorum:

Hello! Thank you for responding! The logic board shows no corrosion. The water indicator stickers are slightly red which shows that water has entered the phone. But the logic board is clean. Should I still give ultrasonic cleaning a try? If so, which ultrasonic solution do you recommend for me to use?

Thank You so Much!

tarafından

it might not show corrison to the eye but you cant see under bga chips, ultrasonic might not even get it working there could be a shorted power rail on the board

tarafından

Yorum Ekle

Yanıtını ekle

Nilsa Rodriguez sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,330