Ana içeriğe geç

Released in 1999, successor to the original PowerMac G3, 300-450 MHz, 64 or 128 MB of RAM, 6 or 12 GB HDD

18 Soru Tümünü görüntüle

Powermac G3 Hard Drive won't format for tiger installation

so, recent;y, i got a bigger hard drive for my powermac g3(10GB to 80GB) but when i enter disk utility, and do to the drive to format it, is starts, shows the status bar, and never makes it past 1/20 of the way there, disk utility never freezes, but after letting it attempt to format all night, it never made any progress, the computer isn't frozen, and the drive is good, but it won't format, I have also tried changing the jumper with no luck, any ideas?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 2
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

Do you know if you've got a rev1 or rev2 B&W, if you've got a rev1 then the HD controllers aren't very stable and it could be it isn't compatible with your new drive.

There's a bit more info on the lowendmac site

http://www.lowendmac.com/ppc/blue-white-...

the rev2 have an IDE controller marked 402, which I think is down near the IDE plug, not 100% as our rev2 is a plane journey away, few years since I worked on it.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

PowerMac G3 Blue and White can only support up to a 12 GB HDD

Bu yanıt yardımcı oldu mu?

Puan -1
Yorum Ekle

Yanıtını ekle

Chris Green sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 5

Her zaman: 3,300