Eşyalarını Tamir Et Topluluk Mağaza

45 Soru Tümünü görüntüle

Seçenekler

I can't turn on my phone. Why?

Hi I buy galaxy j5 at 2015 and worked fine till the battery got swollen around second month in 2018. The phone was discharging very fast and charging very slow and once when it get discharged won't turn on when i let it to charge. So I thought it was bad battery so I buy new one but still it won't turn on even the charging animation when turned off. So I was searching how to unbrick hard bricked phone and I found is jig So I order one from aliexpress but it didn't have the fifth contact I think so it didn't work so I buyed new one and I found old galaxy mini so I tried is jig on this phone and the new usb jig worked but for j5 didn't. I really don't know what to do now I'll be happy for every suggestion. Thanks Dalibor. Ps:sorry for mistakes I'm Czech.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

@dalibortrampota you'll have to first identify which version your phone is. Something like J500F/J700FN (Global Single-SIM); J500F/DS (Global Dual-SIM); J500G/DS (Malaysia, Indonesia, Singapore, Thailand); J500Y (Australia, New Zealand); J500M (LATAM); J500M/DS (Brazil); J500H/DS (Philippines, Russia, Ukraine) will help. Not sure what jig you purchased on Aliexpress but I'd start with something like the Samsung troubleshooting flowchart.

Block Image

Of course, you can always dig a bit deeper for something like this

Block Image

Block Image

Since you originally had the battery swell up, I would also consider a failed PMIC. Samsung has a separate repair guide for that Repair-guide-for-J500-charging.pdf

Update (04/14/2018)

component location for the No-Power chart

Block Image

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

3 Yorum:

@oldturkey03 i have J500FN and the first picture the flowchart i really dont understand to

tarafından

*Most of all option

tarafından

@dalibortrampota not sure what you mean by not following the flowchart. You need to measure the components listed in that image.

tarafından

Yorum Ekle

Seçenekler

have you tried to connect it to your PC?

can you go in download/recovery?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Dalibor Trampota sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 8

Son 30 gün: 18

Her zaman: 860