Ana içeriğe geç

iPad Mini 4— A1538 modelinin Wi-Fi versiyonu için kılavuzlar. 9 Eylül 2015'te duyurulan iPad Mini 4, iPad Mini 3 modelinin yenisidir.

97 Soru Tümünü görüntüle

I turn on my pad and just a flicker is seen on the screen, could it ..

Someone replaced the screen and i added the wake/sleep part to it now it just flickers when i turn it on. Battery has 3.7 v on two legs and 2.4 volts on the other. If they’re not balanced could that be a problem? Also someone pulled hard on connector on the back of theLCD screen/panel and i did a fix to hold it down. Could not find where to get one from to replace it. Any thoughts ? ? Thnaks

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Are you referring to the LCD display connector on the board being damaged? That is most likely what is causing the problem, if it's physically damaged you may need to get it replaced via micro-soldering.

Bu yanıt yardımcı oldu mu?

Puan 0

2 Yorum:

No the one on the back of the LCD screen. I maneuvered a metal clap of sort to press it down to make sure it fully makes contact with the pins underit. I don’t know where i can buy it , it’s not offered on the site.

tarafından

Are you talking about the ZIF connector that connects to the home button on the display board or the ZIF connector that connects to the display on that same board?

The plastic clip lock for the ZIF connector needs to be there or else the pins will not connect properly with a ribbon cable.

tarafından

Yorum Ekle

Yanıtını ekle

Perry Green sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 51