Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

PlayStation 3 (veya daha sık bilinen adıyla PS3), Sony Computer Entertainment tarafından üretilen üçüncü ev bilgisayar eğlence sistemidir ve PlayStation 2'nin akabinde devamı olarak üretilmiştir. 11 Kasım 2006'da piyasaya sürüldü.

768 Soru Tümünü görüntüle

PS3 60Gb fan replaced, but still not spinning up. Any thoughts?

Hi all,

I recently got an old PS3 60gb model CECHC04. System was overheating after 5-10 minutes of power on (idle).

I noticed the fan was not spinning, so I replaced it, thinking it was shot.

However, afterwards it still would not spin up and kept overheating.

Has anybody else come accross this? I was thinking maybe a power issue. Because to my mind (correct me if I'm wrong) the fan should always spin, be it at a low speed.

Thanks in advance for any insight.

Regards

Maarten

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

TÜM SEKMELERİ AÇ

Mac için RAM Yükseltme Kit'leri

Kit Satın Al

Tüm Sekmeler İçin Yeterli RAM

Kit Satın Al

1 Cevapvvbh

Filtre ölçütü:
Seçilen Çözüm

You are correct about it should always spin... However, when you replaced the fan, did you also clean all the gunk off the cpu & gpu, then put new Artic Silver on both the cpu/gpu and the heat sink? You must follow the directions for the YLOD repair.

Update

Yes... the heat gun treatment will allow the solder joints to reflow.

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

Thanks for your response and no I didn't, I just cleaned out the dust and replaced the fan. I will follow your suggestion and continue with changing the coolant paste. Did you also meant I need to use the heatgun treatment?

tarafından

Yorum Ekle

Yanıtını ekle

Maarten sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,629